Product Information
I am looking for an eight-channel IFS receiver with end-mounted servo sockets. Why are you not supplying such items?
Receivers with end-mounted servo sockets are currently under development, and will be available early in 2008.
I was delighted to see that you are planning a 2.4 GHz module for the mc24 when used in a transmitter tray (“aerial pointing up and out”). Can you tell me when such a module might be available?
The mc-24 module for tray use will be available this year (2007).
Our first illustration showed the aerial mounted in the ball, but this will not be the case; instead it will be housed in position “8” in the left-hand angled panel (adjacent to the meter). The hole in the aluminium bezel will need to be enlarged slightly to allow this. The chosen arrangement means that the “old” 35 MHz module can be re-installed in a matter of seconds - simply by disconnecting one lead.
So will it be possible later to use the transmitter module, Order No. 23100, in the mx-24s and the mc-24?? Or will it only fit in the mx-22 transmitter?
The XM-J1 module (Order No. 23100) only fits hand-held transmitters.
Subsequent conversion for use in the mc-24 would be possible in electrical terms, but this is not recommended, as it would also require mechanical modifications to the module and the transmitter. For the mc-24 there will be Order No. 23102 (XM-J2) (December 2007) For the mc-19 / 22 there will be Order No. 23103 (XM-J3) (February 2008) For the mx-24s there will be Order No. 23110 (XM-J4) (Spring 2008).
Please let me know when the IFS system for the Multiplex Profi 4000 can be expected.
Planned shipping date for the Multiplex Profi IFS module is June 2008.
Will the new IFS system also be available for the mx16s transmitter?
At present we are unable to predict whether and when an IFS system will be available for the mx-16s. Our technical departments are currently evaluating the possibilities.