Holder set aerial 2.4 GHz on transmitter
Order No. 23049
The aerial conversion kit makes it possible to convert Graupner transmitters so that the 2.4 GHz aerial can be installed in the ball of the transmitter. The kit consists of 5 parts. Prerequisite is a Graupner SMA connector for the aerial.
Adaptor Graupner/JR-SC
Order No. 23048
Graupner JR-SC power supply adaptor. For connection from the receiver batteries to the receiver using a miniature servo connector.
Reservoir capacitor for Spektrum receive
Order No. 7082.1
The storage capacitor can be plugged into any vacant servo socket at the receiver, and eliminates voltage spikes which could cause interference to the receiver. High-performance digital servos generate extremely high peak voltages under load, which may damage the receiver or have an adverse effect on the receiver's micro-controller under certain circumstances. Receivers and servos are fitted with reservoir capacitors, but they are often too small to filter out these unwanted voltages. The storage capacitor effectively protects the receiver and servos from severe voltage spikes. Brief collapses in voltage are also effectively bridged by the capacitor. The storage capacitor is a sensible precaution for any airborne system, as it enhances the security of thereceiving equipment. It is recommended for use with receiver batteries as well as with electronic receiver power supplies. The storage capacitor is particularly helpful with 2.4 GHz receivers, but is also a useful adjunct to conventional receivers.
back
Graupner iFS Device Programmer XZ-P1 iFS
Order number 23300
The Device Programmer connects with a USB mini-B cable (standard for movie or digital cameras) to the USB port of your PC and allows you to wirelessly program the settings of the Graupner iFS transmitter modules or receivers. It is even possible to re-flash the firmware with newer version transmitter modules and receivers. PC software is intuitive and easy to use and can be downloaded on the iFS Website. In addition a graphic 2,4 GHz band scanner is one of the useful options which helps to get a fast overview of the band conditions.
Dimensions: 31 x 31 x 13 mm
telemetry station XZ-T1 iFS
Order No. 23301
The telemetry station, used in conjunction with a personal computer, provides a wireless means of monitoring telemetry data from any (selectable) Graupner iFS receiver or transmitter in real time. The data is sent from the receiver to the telemetry station at user-selectable intervals. The data can also be recorded and called up again. Available information:Receiver battery voltage, receiver input signal strength, transferred cycle time, number of channels used, servo positions, brown-out detection (decline in power supply voltage, causing a reset to avoid program crashes), selected MAC addresses and all information generated by supplementary sensors connected to the system. The telemetry station also includes all the functions of the Graupner XZ-P1 iFSprogrammer, and is compatible with iFS Version 3 and later. A USB lead is included in the set.
Dimensions approx. 57x 41x 13 mm
Weight approx. 22 g
back
