DX technology
With DX technology, the receiver has a new high-frequency unit with state-ofthe-art components. For reception, a hardware aerial diversity system always switches to the better antenna signal and, for transmission, always uses the aerial that was last used for reception.
The receiver operates even at voltages of about 2 volts. Thus, even when the batteries are getting weak - e.g. at the end of flying time - it is resistant to voltage drops due to high servo currents. In the XR-16DX IFS and XR-20DX IFS receivers, an expanded low voltage monitor has been implemented in 3 stages.
The LED status display shows violet below a receiver supply voltage of 3.5 volts, blue between 3.5 and 4 volts, yellow between 4.0 and 4.5 volts, and green at over 4.5 volts.
Compared to the previous receivers, the weights have been reduced; and the receiver input sensitivity and thus the range have been increased further. Horizontal or miniature servo connections facilitate installation in tight quarters.
| Designation | Product name | Compatible with |
6 Channel Receiver | XR-12DX iFS | for all Transmitter modules | |
8 Channel Receiver | XR-16DX iFS | for all Transmitter modules | |
10 Channel Receiver | XR-20DX iFS | for all Transmitter modules | |
6 Channel Receiver | XR-12DXS iFS | for all Transmitter modules |
Receiver XR-12DX iFS | Order No. 23609
iFS receiver in DX technology for connection of 6 servos.
The programming of the receiver, e.g. failsafe settings or canal switching, is done exclusively by wireless communication via the XZ-P1 IFS programming device. order no. 23300.
Specification | |
Temperature range | -15...+55 °C |
Aerial length | 2 x 22 mm |
Aerial | Wire aerial |
All-up weight, approx. | 5 g |
Frequency | 2400 MHz |
Range approx. | 1000 m |
Dimensions (LxWxH) | 37 x 20 x 11 mm |
Modulation | 2,4 GHz |
Charging rate | 80 mA |
Operating voltage | 3,2 ... 25 V |
Receiver XR-16DX iFS | Order No. 23610
Telemetry-ready IFS receiver in DX technology for connection of 8 servos.
Specification | |
Temperature range | -15...+55 °C |
Aerial length | 2 x 187 mm |
Aerial | Wire aerial |
All-up weight, approx. | 12 g |
Frequency | 2400 MHz |
Range approx. | > 2000 m |
Dimensions (LxWxH) | 44 x 28 x 11 mm |
Modulation | 2,4 GHz |
Charging rate | 80 mA |
Operating voltage | 3,2 ... 25 V |
REceiver XR-20DX iFS | Order No. 23611
Telemetry-ready IFS receiver in DX technology for connection of 10 servos.
Specification | |
Temperature range | -15...+55 °C |
Aerial length | 2 x 210 mm |
Aerial | Wire aerial |
All-up weight, approx. | 16 g |
Frequency | 2400 MHz |
Range approx. | > 2000 m |
Dimensions (LxWxH) | 44 x 35 x 11 mm |
Modulation | 2,4 GHz |
Charging rate | 80 mA |
Operating voltage | 3,2 ... 25 V |
Receiver XR-12DXS iFS | Order No. 23612
Slowflyer IFS receiver in DX technology for connection of 6 servos.
The possibly record-breaking weight of 3g was achieved by using miniature servo connectors. For operations we recommend the Slow-Flyer servos DS277 and Servo C131 in the respective "SC" design (Slow-Flyer Connector).
The programming of the receiver, e.g. failsafe settings or canal switching, is done exclusively by wireless communication via the XZ-P1 IFS programming device, order no. 23300.
Specification | |
Temperature range | -15...+55 °C |
Aerial length | 2 x 22 mm |
Aerial | Wire aerial |
All-up weight, approx. | 3 g |
Frequency | 2400 MHz |
Range approx. | > 1000 m |
Dimensions (LxWxH) | 25 x 18 x 8 mm |
Modulation | 2,4 GHz |
Charging rate | 80 mA |
Operating voltage | 3,2 ... 25 V |